2003 Yamaha Motorsports VMAX Owners Manual - Page 28

2003 Yamaha Motorsports VMAX Manual

Page 28 highlights

INSTRUMENT AND CONTROL FUNCTIONS To install the fuel tank cap 1. Insert the fuel tank cap into the tank opening with the key inserted in the lock and with the mark on the cap facing forward. 2. Turn the key counterclockwise to the original position, and then remove it. 3. Slide the rider seat backrest rearward and push it down. NOTE: The fuel tank cap cannot be installed unless the key is in the lock. In addition, the key cannot be removed if the cap is not properly installed and locked. _ _ EAU00185 CAUTION: Immediately wipe off spilled fuel with a clean, dry, soft cloth, since fuel may deteriorate painted surfaces or plastic parts. @ @ EAU04265 3 1. Fuel tank filler tube 2. Fuel level EAU03753 Fuel Make sure that there is sufficient fuel in the tank. Fill the fuel tank to the bottom of the filler tube as shown. EW000130 Recommended fuel: UNLEADED GASOLINE ONLY Fuel tank capacity: Total amount: 15 L (3.3 Imp gal, 4.0 US gal) Reserve amount: 3 L (0.7 Imp gal, 0.8 US gal) ECA00104 EW000024 WARNING Make sure that the fuel tank cap is properly installed before riding. _ _ _ WARNING G Do not overfill the fuel tank, otherwise it may overflow when the fuel warms up and expands. G Avoid spilling fuel on the hot engine. _ CAUTION: Use only unleaded gasoline. The use of leaded gasoline will cause severe damage to internal engine parts, such as the valves and piston rings, as well as to the exhaust system. _ _ 3-7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125

INSTRUMENT AND CONTROL FUNCTIONS
3-7
3
To install the fuel tank cap
1. Insert the fuel tank cap into the
tank opening with the key inserted
in the lock and with the mark on
the cap facing forward.
2.
Turn the key counterclockwise to
the original position, and then re-
move it.
3.
Slide the rider seat backrest rear-
ward and push it down.
NOTE:
_
The fuel tank cap cannot be installed
unless the key is in the lock. In addition,
the key cannot be removed if the cap is
not properly installed and locked.
_
EW000024
WARNING
_
Make sure that the fuel tank cap is
properly installed before riding.
_
EAU03753
Fuel
Make sure that there is sufficient fuel in
the tank. Fill the fuel tank to the bottom
of the filler tube as shown.
EW000130
WARNING
_
Do not overfill the fuel tank, oth-
erwise it may overflow when the
fuel warms up and expands.
Avoid spilling fuel on the hot
engine.
_
EAU00185
CAUTION:
@
Immediately wipe off spilled fuel
with a clean, dry, soft cloth, since
fuel may deteriorate painted surfac-
es or plastic parts.
@
EAU04265
ECA00104
CAUTION:
_
Use only unleaded gasoline. The
use of leaded gasoline will cause se-
vere damage to internal engine
parts, such as the valves and piston
rings, as well as to the exhaust sys-
tem.
_
1.
Fuel tank filler tube
2.
Fuel level
Recommended fuel:
UNLEADED GASOLINE ONLY
Fuel tank capacity:
Total amount:
15 L (3.3 Imp gal, 4.0 US gal)
Reserve amount:
3 L (0.7 Imp gal, 0.8 US gal)