2002 Yamaha Motorsports V Star Custom Owners Manual - Page 65

2002 Yamaha Motorsports V Star Custom Manual

Get 2002 Yamaha Motorsports V Star Custom PDF manuals and user guides View all 2002 Yamaha Motorsports V Star Custom manuals

Page 65 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR 9. Add the specified amount of the recommended oil, and then install and tighten the oil filler cap. Recommended engine oil: See page 8-1. Oil quantity: Without oil filter element replacement: 2.6 L (2.3 Imp qt, 2.8 US qt) With oil filter element replacement: 2.8 L (2.5 Imp qt, 3.0 US qt) Total amount (dry engine): 3.2 L (2.8 Imp qt, 3.4 US qt) EC000072* _ 1. Oil filter element 2. O-ring 6 5. Remove the oil filter element and O-ring. 6. Install a new oil filter element and the O-ring. 7. Install the oil filter element covers by installing the bolts. 8. Install the engine oil drain bolt, and then tighten it to the specified torque. Tightening torque: Engine oil drain bolt: 43 Nm (4.3 m·kgf, 31 ft·lb) CAUTION: ● In order to prevent clutch slippage (since the engine oil also lubricates the clutch), do not mix any chemical additives with the oil or use oils of a "CD" grade or higher. In addition, do not use oils labeled "ENERGY CONSERVING II" or higher. ● Make sure that no foreign material enters the crankcase. _ 10. Start the engine, and then let it idle for several minutes while checking it for oil leakage. If oil is leaking, immediately turn the engine off and check for the cause. 11. Turn the engine off, and then check the oil level and correct it if necessary. 6-13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
PERIODIC MAINTENANCE AND MINOR REPAIR
6-13
6
5.
Remove the oil filter element and
O-ring.
6.
Install a new oil filter element and
the O-ring.
7.
Install the oil filter element covers
by installing the bolts.
8.
Install the engine oil drain bolt, and
then tighten it to the specified
torque.
9. Add the specified amount of the
recommended oil, and then install
and tighten the oil filler cap.
EC000072*
CAUTION:
_
●
In order to prevent clutch slip-
page (since the engine oil also
lubricates the clutch), do not
mix any chemical additives with
the oil or use oils of a “CD”
grade or higher. In addition, do
not use oils labeled “ENERGY
CONSERVING II” or higher.
●
Make sure that no foreign mate-
rial enters the crankcase.
_
10.
Start the engine, and then let it idle
for several minutes while checking
it for oil leakage. If oil is leaking,
immediately turn the engine off
and check for the cause.
11. Turn the engine off, and then
check the oil level and correct it if
necessary.
1.
Oil filter element
2. O-ring
Tightening torque:
Engine oil drain bolt:
43 Nm (4.3 m·kgf, 31 ft·lb)
Recommended engine oil:
See page 8-1.
Oil quantity:
Without oil filter element
replacement:
2.6 L (2.3 Imp qt, 2.8 US qt)
With oil filter element
replacement:
2.8 L (2.5 Imp qt, 3.0 US qt)
Total amount (dry engine):
3.2 L (2.8 Imp qt, 3.4 US qt)