2010 Volvo XC60 Owner's Manual - Page 88

03 Your driving environment Lighting Lighting panel High/low beam headlights Daytime running lights can be deactivated by a trained and qualified Volvo service technician. NOTE 03 • • The use of daytime running lights is mandatory in Canada. Continuous high beams cannot be activated when the headlight switch is in or 0. High beam flash will position function in these positions. Overview, light switches Headlight switch and lever High beam flash ± Move the lever toward the steering wheel . The high beams come on to position until the lever is released. Thumb wheel for adjusting display and instrument lighting Rear fog light Front fog lights Headlights/parking lights Daytime running lights/no high beams Parking lights Low beams High/low beam headlights Continuous high beams 1. Set the ignition to mode II. 2. With the light switch in position , pull the turn signal lever toward the steering wheel to position to toggle between high and low beams (this also applies on models equipped with the optional Active Bending Lights). > The symbol illuminates in the instrument panel to indicate that the high beams are on. Instrument lighting Illumination of the display and instrument lights will vary, depending on ignition mode. The display lighting is automatically subdued in darkness and the sensitivity is set with the thumb wheel. The intensity of the instrument lighting is adjusted with the thumb wheel. Low beams When the engine is started, the low beams are activated automatically (daytime running lights) if the headlight control is in position 0 or . 88