2010 Volvo XC60 Owner's Manual - Page 237

06 Maintenance and specifications Replacing bulbs Extra high beam2 7. Reconnect the wiring connector to the bulb holder. 8. Put the cover back into position and reinstall the headlight housing. 5. Press the new bulb into the holder and turn it clockwise. 6. Reinsert the bulb holder into the headlight housing and turn it clockwise. 7. Reinstall the headlight housing. Turn signals Side marker lights 1. Remove the headlight housing from the vehicle (see page 234). 2. Remove the cover over the bulbs (see page 235). 3. Disconnect the wiring connector from the bulb holder. 4. Remove the bulb holder from the headlight housing by pulling it straight out. 5. Insert a new bulb in the holder until it snaps in place. It can only be inserted in one way. 6. Press the bulb holder into position in the headlight housing. 1. Remove the headlight housing from the vehicle (see page 234). 2. Remove the bulb holder by turning it counterclockwise and pulling it out of the headlight housing. 3. Pull out the holder to access the bulb. 4. Remove the burned out bulb by pressing it in slightly and turning it counterclockwise. 1. Remove the headlight housing from the vehicle (see page 234). 06 NOTE Before starting to replace a bulb, see page 234. 2 Models with optional Active Bending Lights only. `` 237