2010 Volvo XC60 Owner's Manual - Page 136

04 Comfort and driving pleasure Audio system 2. Hold in one of the preset buttons until the message Channel stored appears on the display. Scan The function automatically searches the current wave band for strong stations. When a station is found, it is played for approx. eight seconds before scanning is resumed. While the station is playing it can be stored as a preset as usual. USB/iPod connector* Automatically storing preset stations The function is especially useful in areas where the radio stations and their frequencies are unfamiliar. The ten strongest radio stations are stored automatically in a separate memory. 1. Select a wave band using FM or AM. 04 NOTE Storing a station interrupts the SCAN function. 2. Hold in AUTO until Autostoring... appears on the display. Once Autostoring... disappears from the display, the stations are stored. The radio continues in Auto mode and Auto appears on the display. The automatically stored presets can now be selected using the preset buttons. Automatic preset storage can be cancelled using EXIT. Auto mode is cancelled by pressing for example AUTO or FM. Returning to Auto mode provides access to the autostored presets: 1. Press AUTO. > Auto appears on the display. 2. Press a preset button. 1. Select a wave band using AM or FM. 2. Press SCAN. > SCAN appears on the display. Close using SCAN or EXIT. AUX and USB sockets in the storage compartment between the front seats Radio text Some stations transmit information on program content, artists, etc. This information can be shown on the display. Activate/deactivate in FM mode under Radio text. An auxiliary device, such as an iPod , MP3 player or a USB flash drive can be connected to the audio system via the connectors in the center console storage compartment. A standard cable from an iPod or MP3 player can be routed under the cover to the AUX connector in the storage compartment. A sound source must be chosen, depending on the device that has been connected: 1. Use MODE to select iPod or USB. The text CONNECT DEVICE will be displayed. 2. Connect the device to the connector in the center console storage compartment (see the illustration). 136 * Option/accessory, for more information, see Introduction.