2010 Volvo XC60 Owner's Manual - Page 55

02 Locks and alarm Remote key and key blade page 122 for a description of the menu system. See also page 61 for information regarding vehicles with the optional keyless drive. Immobilizer (start inhibitor) Each of the keys supplied with your vehicle contains a coded transponder. The code in the key is transmitted to an antenna in the ignition slot where it is compared to the code stored in the start inhibitor module. The vehicle will start only with a properly coded key. If you misplace a key, take the other keys to a trained and qualified Volvo service technician for reprogramming as an antitheft measure. The following messages (which may appear in the instrument panel display) are related to the immobilizer: Message Key error Reinsert key Meaning Remote key not recognized during start. Try to start the vehicle again. PCC with keyless drive only. Remote key not recognized during start. Try to start the vehicle again. Remote key fault during start. Contact an authorized Volvo workshop. 02 Confirmation when locking/unlocking the vehicle When the vehicle is locked with a remote key, the turn signals will flash once to confirm that this has been completed correctly. When the vehicle is locked, confirmation will only be given if all of the locks are locked after the doors have been closed. Car key Not found NOTE If you do not receive confirmation when locking the vehicle, check whether a door or the tailgate is ajar, or if this feature has been turned off in the menu. Immobilizer See manual CAUTION Never use force when inserting the remote key in the ignition slot. The vehicle cannot be started if the transponder is damaged. This function can be activated or deactivated under Car settings Light settings Lock confirmation, light, or Car settings Light settings Unlock confirmation, light. See page 122 for a description of the menu system. USA-FCC ID: LTQWFS 125VO This device complies with part 15 of the FCC rules. Operation is subject to the following condition: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. `` 55