2010 Volvo S80 Owner's Manual - Page 225

06 Maintenance and specifications Replacing bulbs 6. Return the bulb holder into position in the headlight housing. 7. Put the cover back into position and reinstall the headlight housing. 6. Press the bulb holder into the socket and press until it clicks into place. 7. Put the cover back into position and reinstall the headlight housing. 6. Press the cover until it clicks into position. 7. Reinstall the headlight housing. Side marker lights Parking lights Turn signals G021749 G021750 NOTE 1. Remove the headlight housing from the vehicle (see page 222). 2. Remove the cover over the bulbs (see page 223). 3. To access the bulb, first remove the high beam bulb. 4. Pull the wire to withdraw the bulb holder. 5. Remove the burned out bulb and install a new one. It can only be secured in one position. 1. Remove the headlight housing from the vehicle (see page 222). 2. Remove the round cover by pulling the tab until the cover comes off. 3. Pull out the holder to access the bulb. 4. Remove the burned out bulb by pressing it in slightly and turning out before pulling it out. Press a new bulb into the socket. 5. Press the bulb holder into the socket and press until it clicks into place. Before starting to replace a bulb, see page 222. 06 1. Remove the headlight housing from the vehicle (see page 222). 2. Remove the round cover. 3. Pull the wire to withdraw the bulb holder. 4. Pull out the burned out bulb and install a new one. It can only be secured in one position. `` G021751 225