2008 Volvo S80 Owner's Manual - Page 149

Temporarily switching off Spin control 1. Turn the thumbwheel until the DSTC menu is shown. 2. Hold down the RESET button to toggle between DSTC SPIN CONTROL ON or OFF. Messages in the information display DSTC Temporarily OFF - system function has been temporarily reduced due to high brake disc temperature. The function is activated automatically when the brakes have cooled. DSTC Service required - the system has been disabled due to a fault. If this occurs: 152 04 Comfort and driving pleasure Stability system 1. Stop the vehicle in a safe place and turn off the engine. 2. Restart the engine. If the message remains when the engine is restarted, drive to an authorized Volvo workshop to have the system inspected. Symbols in the instrument panel If the symbols and are displayed at the same time, read the message in the information display. If the symbol appears alone, it may appear as follows: If the symbol flashes, this indicates that the stability system is actively functioning to help counteract wheel spin and/or a skid. If the symbol remains on for approximately 2 seconds after the engine has been started, this indicates that the system is performing a self-diagnostic test. WARNING The stability system is intended to help improve driving safety. It supplements, but can never replace, the driver's judgment and responsibility when operating the vehicle. Speed and driving style should always be adapted to traffic and road conditions. 153 04 Comfort and driving pleasure