2008 Volvo S80 Owner's Manual - Page 105

107 03 Your driving environment Starting the engine Starting the engine Ignition switch with remote key inserted (see page 80 for more information) 1. Fasten the seat belt. WARNING Before starting the engine, check that the seat, steering wheel and mirrors are adjusted properly. Make sure the brake pedal can be depressed completely. Adjust the seat if necessary. 2. Insert the remote key into the ignition slot. Press the key until it is drawn into the slot 1 . NOTE The remote key should be inserted into the ignition slot with the key blade end of the remote pointing out and the key pad facing up. See the illustration on page 80. 3. Depress the brake pedal2 . WARNING An extra mat on the driver's floor can cause the accelerator and/or brake pedal to catch. Check that the movement of these pedals is not impeded. Not more than one protective floor covering may be used at one time. 4. Press and release the START/STOP ENGINE button. The autostart function will operate the starter motor until the engine starts. The starter motor operates for a maximum of 10 seconds. If the engine has not started, repeat the procedure. 1 On vehicles with the optional keyless drive, it is only necessary to have a remote control in the passenger's compartment. 2 If the vehicle is moving, it is only necessary to press the START/STOP ENGINE button to start the vehicle. WARNING Always remove the remote key from the ignition slot when leaving the vehicle, especially if there are children in