2008 Volvo C70 Owner's Manual - Page 217

The radio will then exit auto-store mode and the stored station can be selected by pressing the preset button. Scanning SCAN (4) automatically searches through the selected waveband for strong AM or FM stations. When the radio finds a station, that station will be played for approximately 8 seconds, after which scanning resumes. Activating/deactivating SCAN 1. Select radio mode using the AM/FM button (2). 2. Press SCAN to activate the function. SCAN is shown in the display. 3. Press the SCAN or EXIT button to deactivate the scan function and listen to the selected station. Storing a station found with SCAN A station can be stored as a preset while the SCAN function is activated. Press one of the preset buttons (2) under which the station is to be stored. Hold down the button until STATION STORED is displayed. The SCAN function will be deactivated and the station can be selected by pressing the preset button. Radio text Certain stations broadcast program information, which can be shown in the display. To start this function: 1. Select FM1 or FM2 and press the MENU button. 2. Press ENTER . 3. Select RADIOTEXT in the menu and press ENTER . To deactivate this function, select RADIOTEXT again and press ENTER . 241 10 Audio Radio functions Listening to satellite radio The Sirius satellite system consists of a number of high elevation satellites in geosynchronous orbit. NOTE The digital signals from the Sirius satellites are line-of-sight, which means that physical obstructions such as bridges, tunnels, etc, may temporarily interfere with signal reception. Avoid any obstructions, such as metallic objects transported on roof racks or in a ski box, or other antennas that may impede signals from the SIRIUS satellites. Selecting Sirius radio mode 1. Press Power to switch on the audio system (see page 239 for information on the standard radio functions).