2016 Polaris POLARIS GENERAL 1000 EPS/1000 EPS DELUXE Owners Manual - Page 32
2016 Polaris POLARIS GENERAL 1000 EPS/1000 EPS DELUXE Manual
Page 32 highlights
FEATURES AND CONTROLS Instrument Cluster Indicator Lamps Lamp Indicates Helmet/Seat Belt Condition The lamp is a reminder to the operator to ensure all riders are wearing helmets and seat belts before operating. The driver's seat belt is equipped with a seat belt interlock. Vehicle speed will be limited to 15 MPH (24 km/h) if the seat belt is not secured. When standard mode is selected, speed displays in miles per hour. Vehicle Speed When metric mode is selected, speed displays in kilometers per hour. Check Engine This indicator appears if an EFI-related fault occurs. Do not operate the vehicle if this warning appears. Serious engine damage could result. Your POLARIS dealer can assist. This indicator illuminates briefly when the key is turned to the ON position. If the light remains on, the EPS system is inoperative. Your POLARIS dealer can assist. This lamp illuminates to indicate an overheated engine. If the indicator flashes, the overheating condition remains, and the system will automatically reduce engine power. This warning usually indicates that the vehicle is operating at an RPM too low to keep the battery charged. It may also occur when the engine is at idle and high electrical load (lights, cooling fan, accessories) is applied. Drive at a higher RPM or recharge the battery to clear the warning. This lamp illuminates when the headlamp switch is set to high beam. This lamp illuminates when fuel level in the fuel tank is low. This lamp illuminates when the transmission is in neutral and the ignition key is in the ON position. Information about the speed key is provided in the accessory kit. EPS Warning (if equipped) Over Temperature Check Battery High Beam Low Fuel Neutral Speed Key (optional accessory) 30