2013 Polaris Ranger 500 Midsize Owners Manual - Page 59

2013 Polaris Ranger 500 Midsize Manual

Get 2013 Polaris Ranger 500 Midsize PDF manuals and user guides View all 2013 Polaris Ranger 500 Midsize manuals

Page 59 highlights

MAINTENANCE POLARIS Variable Transmission (PVT) System PVT Drying There may be some instances when water is ingested into the PVT system. Use the following instructions to dry it out before operating. 1. Position the vehicle on a level surface. 2. Remove the drain plug. Allow the water to drain completely. Reinstall the drain plug. 3. Place the transmission in PARK. 4. Start the engine. 5. Apply varying throttle for 10-15 seconds to expel the moisture and air-dry the belt and clutches. Do not hold the throttle wide open for more than 10 seconds. 6. Allow the engine RPM to settle to idle speed. Apply the brakes. Shift the transmission to the lowest available range. 7. Test for belt slippage. If the belt slips, repeat the process. 8. Take the vehicle to your dealer for service as soon as possible. 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
55
MAINTENANCE
POLARIS Variable Transmission (PVT) System
PVT Drying
There may be some instances when water is ingested into the PVT system. Use the following
instructions to dry it out before operating.
1.
Position the vehicle on a level surface.
2.
Remove the drain plug. Allow the water to drain completely. Reinstall the drain plug.
3.
Place the transmission in PARK.
4.
Start the engine.
5.
Apply varying throttle for 10-15 seconds to expel the moisture and air-dry the belt and
clutches. Do not hold the throttle wide open for more than 10 seconds.
6.
Allow the engine RPM to settle to idle speed. Apply the brakes. Shift the transmission to
the lowest available range.
7.
Test for belt slippage. If the belt slips, repeat the process.
8.
Take the vehicle to your dealer for service as soon as possible.