2013 Polaris Ranger 500 Midsize Owners Manual - Page 30
2013 Polaris Ranger 500 Midsize Manual
Page 30 highlights
FEATURES AND CONTROLS Instrument Cluster Rider Information Center Standard Modes Use the yellow mode button located under the speedometer to toggle through the mode options. See page 18. Odometer Mode The odometer records the miles traveled by the vehicle. Trip Meter Mode The trip meter records the miles traveled by the vehicle on each trip if it's reset before each trip. To reset the trip meter, select the trip meter mode. Press and hold the mode button until the total changes to 0. Tip: In the Rider Information Center, the trip meter display contains a decimal point, but the odometer displays without a decimal point. Hour Meter Mode This mode logs the total hours the engine has been in operation. Tachometer Mode The engine RPM is displayed digitally. Small fluctuations in the RPM from day to day may be normal because of changes in humidity, temperature and elevation. Diagnostic Mode The wrench icon will display when the gauge is in the diagnostic mode. To exit the diagnostic mode, turn the key switch off and on. Any movement of the tires will also cause the gauge to exit the diagnostic mode. To enter the diagnostics mode: 1. Turn the key switch off and wait 10 seconds. 2. Place the transmission in neutral. 3. Hold the mode button and turn the key switch on. Release the switch as soon as the display is activated. 4. Use the mode button to toggle through the diagnostic screens. 26
![](/manual_guide/autos/2013-polaris-ranger-500-midsize-owners-manual-e0125a2/30.png)