2005 Polaris Magnum 330 2x4 Owners Manual - Page 80
2005 Polaris Magnum 330 2x4 Manual
Page 80 highlights
Transmission Oil MAINTENANCE AND LUBRICATION Always check and change the transmission oil at the intervals outlined in the Periodic Maintenance Chart beginning on page 68. Maintain the oil level 1 5/8" from the top of the fill hole. We recommend the use of Premium AGL Synthetic Gearcase Lubricant. Refer to the gearcase specifications chart on page 76. See page 108 for the part numbers of Polaris products. 1 5/8″ Oil Check The transmission fill plug is located on the right side of the machine, behind the footwell. 1. Position the ATV on a level surface. 2. Remove the fill plug (1), and check the oil level. 3. Add the recommended oil as needed. 4. Reinstall the fill plug. Torque to specification. 1 Oil Change The transmission drain plug is located on the bottom left hand side of the machine. 1. Remove the propshaft shield (if equipped) from the right side of the vehicle to access the fill plug. 2. Remove the fill plug. 3. Remove the transmission drain plug and drain the oil into an appropriate container. Discard used oil properly. 4. Clean and reinstall the drain plug. Torque to specification. 5. Add the recommended fluid. 6. Reinstall the fill plug. Torque to specification. 7. Check for leaks. 8. Reinstall the propshaft shield (if equipped). 77