2004 Polaris Sportsman 700 EFI Owners Manual - Page 85

MAINTENANCE AND LUBRICATION Toe Alignment WARNING Severe injury or death can result from improper toe alignment and adjustment. Do not attempt to adjust tie rod alignment. All tie rod adjustments should be performed by an authorized Polaris dealer. Use the following procedure to check the toe alignment of the vehicle. The recommended toe alignment is 1/8″ to 1/4″ toe out. 1. Set the handlebars in a straight-ahead position. NOTE: The steering frog can be used as an indicator of whether the handlebars are straight. The frog should always point straight back from the steering post. 2 2. Place stands (1) in front of the vehicle, perpendicular to the rear tires. See illustration. 3. Tie an elastic string around 3 the stands, making sure the string just touches the side surface of the rear tires on each side of the vehicle and goes around the stands in front of the vehicle (2). 4. Measure the distance from 1 the string to the rim at the front and rear of the front rim (3). Rear measurement should be 1/16″ - 1/8″ (.2 to .3 cm) more than the front measurement. NOTE: If you discover improper alignment, see your Polaris dealer for service. Steering Assembly The steering assembly of the ATV should be checked periodically for loose nuts and bolts. If loose nuts and bolts are found, see your Polaris dealer for service before operating the vehicle. 82