2008 Ducati SportClassic Sport 1000 Biposto Owners Manual - Page 45
2008 Ducati SportClassic Sport 1000 Biposto Manual
Page 45 highlights
Lubricating cables and joints The condition of the outer throttle cables should be checked at regular intervals. The outer cables should show no signs of kinking or cracking. Operate the control to check that the inner cable slides smoothly: if you feel any friction or catching, have the cable replaced by a Ducati Dealer or Authorized Service Centre. To prevent these problems, periodically lubricate the ends of each control cable with SHELL Advance Grease or Retinax LX2. Open the twistgrip housing by unscrewing the two screws (1, fig. 36) and lubricate the ends of each control cable and the races with SHELL Advance Grease or Retinax LX2. fig. 36 1 E Warning Close the twistgrip housing carefully, inserting the cable in the race. Refit the housing and tighten the bolts (1) to 6 Nm. To ensure smooth operation of the sidestand pivot, remove any dirt and apply SHELL Alvania R3 to all points subject to friction (fig. 37). fig. 37 45