2008 Ducati SportClassic Sport 1000 Biposto Owners Manual - Page 13
2008 Ducati SportClassic Sport 1000 Biposto Manual
Page 13 highlights
LCD functions When the engine is switched on (key turned from OFF to ON), the instrument panel performs a check of all the instruments (dials, display, warning lights), see (fig. 5 and fig. 6). LCD functions (1) By pressing button (A, fig. 6) with the key turned to ON, you can cycle between display of the trip counter and the odometer and, if the fuel level warning light is on, the fuel reserve trip counter. Resetting the trip meter If button (A, fig. 6) is held pressed for more than 2 seconds while the TRIP (trip meter) is active, the display is reset (LCD 1). LCD functions (2) If button (B, fig. 6) is pressed with the ignition key at ON, the display shows the clock and the oil temperature. Setting the clock Press (B, fig. 6) for at least 2 seconds and the time will be shown in display (2, fig. 6). Select AM/PM by pressing button (A, fig. 6). Press button (B, fig. 6) to select the hour setting function. Press (A) repeatedly to change the hour indication. Press button (B) to change to the minute setting function. Press button (A) to increase the minutes; hold the button pressed for more than 5 seconds to increase the rate of change. Press button (B) to exit the clock setting function. KM/H OFF MIN -1 x 1000 E fig. 5 CHECK KM/H MIN -1 x 1000 TOT AMPM TRIP C F TOT AMPM TRIP C F 1 A B 2 fig. 6 13