Dell PowerConnect 6248 User's Guide - Page 686
Match to Protocol ID, Destination L4 Port
View all Dell PowerConnect 6248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 686 highlights
• Subnet Mask - The subnet mask of the destination IP address. This field is required when Destination IP Address is checked. • Source L4 Port- Requires a packet's TCP/UDP source port to match the port listed here. Select one of the following options: - Select From List - Click to select from a list of well known source ports to which packets are matched. - Match to Port - Click to add a user-defined Port ID to which packets are matched. Range is 065535. • Destination L4 Port - Requires a packet's TCP/UDP destination port to match the port listed here. Select one of the following: - Select From List - Select from a list of well known destination ports to which packets are matched. - Match to Port - Click to add a user-defined Port ID to which packets are matched. Range is 065535. • Protocol - Requires a packet's protocol to match the protocol listed here. Select one of the following: - Select from List - Select from the drop-down list of protocols. - Match to Protocol ID - Enter a protocol ID to which packets are matched. Range is 0-255. • EtherType - Requires a frames' Ethertype to match the Ethertype listed here. Select one of the following: - Select from List - Select from the drop-down list of EtherTypes. - Match to Value - Enter an Ethertype ID to which packets are matched. Range is 0600-FFFF. • Class of Service - Requires a packet's Class of Service (CoS) for incoming packets to match the CoS entered here. Range is 0-7. • Source MAC Address - Requires a packet's Source MAC Address for incoming packets to match the address entered here. • Source MAC Mask - Specifies the Source MAC address wildcard mask. Wild card masks determine which bits are used and which bits are ignored. A wild card mask of 00.00.00.00.00.00 indicates that no bit is important. A wildcard of FF:FF:FF:FF:FF:FF indicates that all bits are important. This field is required when Source MAC Address is checked. • Destination MAC Address - Requires a packet's Destination MAC Address for incoming packets to match the address entered here. • Destination MAC Mask - Specifies the Destination MAC address wildcard mask. Wild card masks determine which bits are used and which bits are ignored. A wild card mask of 00.00.00.00.00.00 indicates that no bit is important. A wildcard of FF:FF:FF:FF:FF:FF indicates that all bits are important. This field is required when Destination MAC Address is checked. • VLAN ID - Requires a packet's VLAN ID for incoming packets to match the VLAN ID entered here. Range is 0-4095. 686 Configuring Quality of Service