Dell PowerConnect 6248 User's Guide - Page 307
Select from List, Match to Value
View all Dell PowerConnect 6248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 307 highlights
• Rule Id - Selects or creates a user-defined ACLs. Enter an existing Rule ID, or create a new one by selecting Create from the drop-down menu and entering the desired new Rule ID in the field next to it. The new ID is created once Apply Changes is clicked. • Action - Selects the ACL forwarding action, which can be one of the following values: - Permit - Forwards packets which meet the ACL criteria. - Deny - Drops packets which meet the ACL criteria. • Assign Queue ID - Click the check box to apply this criteria, then enter an identifying number from 0 to 6. • Redirect Interface - Select from the drop-down list of interfaces one that packets meeting this rule can be redirected to. • Mirror Interface - Select from the drop-down list an interface that packets meeting this rule can be mirrored to. • Logging - Click the check box to enable logging for this ACL. This feature is supported for the Deny action only. • Match Every - Requires a packet to match the criteria of this ACL. Click the check box to apply this criteria. • Class of Service - Requires a packet's CoS to match the CoS value listed here. Click the check box and enter a CoS value between 0 and 7 to apply this criteria. • Secondary CoS - Requires a packet's secondary CoS to match the CoS value listed here. Click the check box and enter a CoS value between 0 and 7 to apply this criteria. • Destination MAC Address - Requires a packet's destination port MAC address to match the address listed here. Click the check box and enter an address to apply this criteria. • Destination MAC Mask - Enter the MAC Mask associated with the Destination MAC to match. • EtherType - Requires a packet's EtherType to match the EtherType listed here. Click the check box and select from a list or enter the EtherType ID: - Select from List - Select desired EtherType from the drop-down menu. - Match to Value - Enter the desired port number to match. • Source MAC Address - Requires a packet's source port MAC address to match the address listed here. Click the check box and enter an address to apply this criteria. • Source MAC Mask - If desired, enter the MAC mask for the source MAC address to match. • Vlan Id - Requires a packet's VLAN ID to match the ID listed here. Click the check box and enter the VLAN ID to apply this criteria. Possible field values are 1-4095. • Remove - Removes the MAC ACL Rule when Remove is checked and Apply Changes is clicked. Modifying a MAC-based Rule NOTE: Rules can be modified only when the ACL to which they belong is not bound to an interface. Configuring Switching Information 307