ZyXEL WAX620D-6E User Guide - Page 33
Switching Management Modes, Standalone-to-NCC, AC-to-NCC, NCC-to-AC, NCC-to-Standalone
![]() |
View all ZyXEL WAX620D-6E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Chapter 2 AP Management Note: If the Zyxel Device is already registered to NCC, the controller will be unable to manage it. An AC uses Control And Provisioning of Wireless Access Points (CAPWAP, see RFC 5415) to discover and configure multiple managed APs. 2.2 Switching Management Modes The Zyxel Device is in standalone mode by default, with NCC and/or AC discovery enabled. Standalone-to-NCC Register the Zyxel Device at the NCC website and then turn on the Zyxel Device. Make sure that NCC Discovery is enabled (see Section 9.6 on page 115). The NCC manages the Zyxel Device automatically when it is discovered. Settings on the Zyxel Device will be overwritten with what you have configured on the NCC website. Standalone-to-AC By default, the Zyxel Device must be in the same subnet as the AC. See Section 9.1.1 on page 104 for setting it up in a different subnet. Make sure AC Discovery is enabled (see Section 9.5 on page 113). The AC manages the Zyxel Device automatically when it is discovered. AC-to-NCC Register the Zyxel Device at the NCC website. Make sure that NCC Discovery is enabled on your Zyxel Device (see Section 9.6 on page 115). In the AC Web Configurator, select the Zyxel Device and press the Nebula button. The NCC manages the Zyxel Device automatically when it is discovered. NCC-to-AC Unregister the Zyxel Device at the NCC portal. By default, the Zyxel Device must be in the same subnet as the AC. See Section 9.1.1 on page 104 for setting it up in a different subnet. Make sure AC Discovery is enabled (see Section 9.5 on page 113). The AC manages the Zyxel Device automatically when it is discovered. NCC-to-Standalone Unregister the Zyxel Device from the NCC organization/site. The Zyxel Device will automatically reset to its factory defaults and return to standalone mode. AC-to-Standalone Use the Reset button to return the Zyxel Device to its factory default settings (see Section 28.6 on page 275). NWA/WAC/WAX Series User's Guide 33
![](/manual_guide/products/zyxel-wax640s6e-user-guide-9a6eaad/33.png)