Zanussi ZWF842D1DG User Manual - Page 19

Setting A Programme, Starting A Programme With The Delay Start

Get Zanussi ZWF842D1DG PDF manuals and user guides View all Zanussi ZWF842D1DG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

With the flap in the position DOWN: • Do not use gelatinous or thick liquid detergents. • Do not exceed to liquid detergent dose indicated on the flap. • Do not set the prewash phase. • Do not set the delay start function. 5. Measure out the detergent and the fabric conditioner. 6. Carefully close the detergent dispenser. Make sure that the flap does not cause a blockage when you close the drawer. SETTING A PROGRAMME 1. Turn the programme dial to select the desired washing programme. The indicator of the Start/Pause button flashes. The display shows an indicative programme duration. 2. To change the temperature and/or the spin speed, touch the related buttons. 3. If desired, set one or more options by touching the related buttons. The related indicators illuminate on the display and the given information changes accordingly. If a selection is not possible an acoustic signal sounds and the display shows . STARTING A PROGRAMME Touch the Start/Pause button to start the programme. It is not possible to start the programme when the indicator of the button is off and doesn't flash (e.g. programme dial on a wrong position). The related indicator stops flashing and stays on. The programme starts, the door is locked. The display shows the indicator . The drain pump can operate shortly before the appliance fills water. STARTING A PROGRAMME WITH THE DELAY START 1. Touch the Delay Start button repeatedly until the display shows the desired delay time. On the display the indicator shows 2. Touch the Start/Pause button. The appliance door locks and starts the countdown of the delay start. The display shows the indicator . When the countdown is completed, the programme starts automatically. Cancelling the delay start after the countdown has started To cancel the delay start: 1. Touch the Delay Start button repeatedly until the display shows the desired delay time. On the display the indicator shows Touch the Start/Pause button. The appliance lock the door and starts the countdown of the delay start. The display shows the indicator . When the countdown is completed, the programme starts automatically. 2. Touch the Start/Pause button to pause the appliance. The related indicator flashes. 3. Touch the Delay Start button repeatedly until the display shows and the indicator goes off. 4. Touch the Start/Pause button again to start the programme immediately. Changing the delay start after the countdown has started To change the delay start: 1. Touch the Start/Pause button to pause the appliance. The related indicator flashes. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
With the
flap
in the position
DOWN
:
•
Do not use gelatinous or thick liquid
detergents.
•
Do not exceed to liquid detergent dose
indicated on the
flap.
•
Do not set the prewash phase.
•
Do not set the delay start function.
5.
Measure out the detergent and the fabric
conditioner.
6.
Carefully close the detergent dispenser.
Make sure that the
flap
does not cause a blockage
when you close the drawer.
SETTING A PROGRAMME
1.
Turn the programme dial to select the desired
washing programme.
The indicator of the Start/Pause
button
flashes.
The display shows an indicative programme
duration.
2.
To change the temperature and/or the spin
speed, touch the related buttons.
3.
If desired, set one or more options by touching
the related buttons. The related indicators
illuminate on the display and the given
information changes accordingly.
If a selection is
not possible
an
acoustic signal sounds and the display
shows
.
STARTING A PROGRAMME
Touch the Start/Pause
button to start the
programme. It is not possible to start the
programme when the indicator of the button is off
and doesn't
flash
(e.g. programme dial on a wrong
position).
The related indicator stops
flashing
and stays on.
The programme starts, the door is locked. The
display shows the indicator
.
The drain pump can operate shortly
before the appliance
fills
water.
STARTING A PROGRAMME WITH THE
DELAY START
1. Touch the Delay Start
button repeatedly until
the display shows the desired delay time. On the
display the indicator shows
2. Touch the Start/Pause
button. The appliance
door locks and starts the countdown of the delay
start. The display shows the indicator
.
When the countdown is completed, the programme
starts automatically.
Cancelling the delay start after the
countdown has started
To cancel the delay start:
1.
Touch the Delay Start
button repeatedly
until the display shows the desired delay time.
On the display the indicator shows
Touch the Start/Pause
button. The appliance
lock the door and starts the countdown of the delay
start. The display shows the indicator
.
When the countdown is completed, the programme
starts automatically.
2.
Touch the Start/Pause
button to pause the
appliance. The related indicator
flashes.
3.
Touch the Delay Start
button repeatedly
until the display shows
and the indicator
goes off.
4.
Touch the Start/Pause
button again to start
the programme immediately.
Changing the delay start after the countdown
has started
To change the delay start:
1.
Touch the Start/Pause
button to pause the
appliance. The related indicator
flashes.
19