Zanussi ZBB28441SA Product Manaul - Page 13

I 4mm 44mm I 3 Adjust the appliance in the niche. Make sure that the distance between the appliance and the cupboard front-edge is 44 mm. The lower hinge cover (in the accessories bag) makes sure that the distance between the appliance and the kitchen furniture is correct. Make sure that the clearance between the appliance and the cupboard is 4 mm. Open the door. Put the lower hinge cover in position. 4 Attach the appliance to the niche with 4 screws. C D E E B 5 Remove the cor- 6 Attach the covers rect part from the (C, D) to the lugs and hinge cover (E). Make the hinge holes. sure to remove the Install the vent grille part DX, in the case (B). of right hinge, SX in Attach the hinge cov- opposite case. ers (E) to the hinge. GH Ha Hb Hc Hd 7 Connect the appliance laterally to the kitchen furniture sidewall: 1. Loosen the screws of the part (G) and move the part (G) till the furniture sidewall. 2. Tighten the screws of the part (G) again. 3. Attach the part (H) to the part (G). 8 Disconnect the parts (Ha), (Hb), (Hc) and (Hd). ~50 mm 90o Ha 21 mm 90o ~50 mm 21 mm Hc 9 Install the part (Ha) on the inner side of the kitchen furniture. 10 Push the part (Hc) on the part (Ha). www.zanussi.com 13