Zanussi ZBB28441SA Product Manaul - Page 12
Ventilation requirements, Installing the appliance, Caution - installation
View all Zanussi ZBB28441SA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
• Loosen the upper pin and remove the spacer. • Remove the upper pin and the upper door. • Loosen the middle hinge. • Remove the lower door. • Loosen the lower pin. On the opposite side: • Install the lower pin. • Install the lower door. • Tighten the middle hinge. • Install the upper door. • Tighten the spacer and tighten the upper pin. Ventilation requirements The airflow behind 5 cm x 2 the appliance must min. 200cm2 be sufficient. x 1 min. 200cm2 Installing the appliance Caution! Make sure that the mains cable can move freely. Do the following steps: 1 If necessary cut the adhesive sealing strip and then apply it to the appliance as shown in figure. 2 Install the appliance in the niche. Push the appliance in the direction of the arrows (1) until the upper gap cover stops against the kitchen furniture. Push the appliance in the direction of the arrows (2) against the cupboard on the opposite side of the hinge. 12 www.zanussi.com