Vtech vt1970 User Manual - Page 31

SETTING UP YOUR VT 1970ci DIGITAL ANSWERING DEVICE Set Announce Only • Press the MENU key 5 times until you hear: "SET ANNOUNCE ONLY" • Now press SELECT . The voice prompt will say either OFF or ON. Repeated presses of SELECT will alternate between ON and OFF. The Base Unit will display either ON or OF (off) to reflect your choice. • Choose OFF if you want your VT 1970ci to record your callers' messages (Normal Answering Mode). • Choose ON if you only want your callers to hear your greeting without allowing them to leave you a message (Announce-Only Mode). • Once you've selected OFF (or ON), press TIME/SET to confirm your selection. The voice prompt will say: "ANNOUNCE ONLY IS OFF (or ON)". MENU SELECT TIME/SET Set Outgoing Message • Press MENU until you hear "Set Outgoing Message". • Press MEMO . The voice prompt will say "Now Recording", followed by a tone. • Begin speaking after the tone, towards the front edge of the Base Unit. The Base Unit display becomes a timer as you record your outgoing message. • Your outgoing message must be longer than 2 seconds. MENU MEMO PLAY/STOP NOTE: Your outgoing message can be up to 90 seconds. • When done, press PLAY/STOP . Your outgoing message will automatically be played back. You can now program the other 6 functions. vt1970ci/hjmannual 31 31 1/29/99, 12:50 PM