Viper 5002 Owner Manual - Page 60
Quick Reference Guide
View all Viper 5002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
✂ QUICK REFERENCE GUIDE To arm using your LCD remote ➤ You can activate, or arm, the system by pressing on your remote for one second. When the system arms, you will hear a short siren sound, or chirp, and the parking lights will flash once. If the vehicle's power door locks have been connected to the system, the doors will lock. Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet. ✂ To disarm using your LCD remote ➤ To disarm the system, press . You will hear two chirps, and the parking lights will flash twice. If power locks are connected to the system, the doors will unlock. If the siren chirps either four or five times when disarming, see Diagnostics section. This is called Tamper Alert. Arming while driving ➤ Press on your remote for two second while the vehicle is running. The system will chirp once and then once more to indicate that the ignition is on. Disarming without a LCD remote ➤ Turn on the ignition. Press and release the Valet® button the programmed number of times within 15 seconds. After five seconds, the system will disarm. If it does not, you may have waited too long. Turn the ignition off and on and try again. To enter or exit Valet® Mode ➤ Turn ignition to RUN position, then turn to OFF position. Press and release the Valet® button within 10 seconds. The in-vehicle status LED will light solid if you are entering Valet® Mode, and it will go out if you are exiting Valet® Mode. To activate Panic Mode ➤ Press and hold or down for approximately two seconds. To exit Panic Mode ➤ Press or on the remote. To activate Silent Mode™ ➤ Press briefly before arming or disarming, and the confirmation chirp(s) will be eliminated for that one operation only. Location of Valet® Button Number of Valet® Button pulses for disarming © 2006 directed electronics 55