Viper 5002 Owner Manual - Page 39
Exit Shock Sensor Adjustment Mode, Reset Shock Sensor to Default Setting
View all Viper 5002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
➜ Exit Shock Sensor Adjustment Mode: The adjustment mode will be exited if: ➤ No input from transmitter for 15-seconds. ➤ No input from sensitivity testing for 15-seconds. ➤ The ignition is turned On. ➤ The Valet button is pressed. The siren and LCD remote will emit 1 long beep and the vehicle's LED will extinguish when shock adjustment mode is exited. ➜ Reset Shock Sensor to Default Setting: The shock sensor can be restored to a default setting of 10 to facilitate re-adjustment at any time while in adjustment mode. 1. Simultaneously press the and buttons. 2. The siren and LCD remote will emit 3 quick beeps to indi- cate the sensor has been reset to level 10 (mid-range). 3. The system returns to shock sensor adjustment mode for further adjustment, if required. 34 © 2006 directed electronics