Viper 350HV Owner Manual - Page 32
Turn the ignition on. - valet switch
View all Viper 350HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
If the system has entered the triggered sequence (siren has begun chirping), pressing the disarm button of the transmitter will not disarm VRS®. To disarm the VRS® during a VRS® trigger sequence: 1. Turn the ignition on. 2. Press the Valet switch the pre- programmed number of times to DRW-35 disarm the VRS® system. note: If the VRS® system has begun its chirping sequence, the ignition must be turned off, then on to disarm. If you are driving the vehicle at the time, pull to a safe place away from traffic and follow the triggered sequence disarm procedure. © 2005 directed electronics, inc. all rights reserved 29
29
© 2005 directed electronics, inc. all rights reserved
If the system has entered the triggered sequence (siren has begun
chirping), pressing the disarm button of the transmitter will not
disarm VRS
®
. To disarm the VRS
®
during a VRS
®
trigger
sequence:
1.
Turn the ignition on.
2. Press the Valet switch the pre-
programmed number of times to
disarm the VRS
®
system.
note:
If the VRS
®
system has begun its chirping sequence,
the ignition must be turned off, then on to disarm. If you
are driving the vehicle at the time, pull to a safe place
away from traffic and follow the triggered sequence dis-
arm procedure.
DRW-35