Viper 350HV Owner Manual - Page 13
arming while driving
View all Viper 350HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
➤ Press a second time within five seconds: The siren chirps twice followed by a long chirp. Zone 2 is now bypassed. ➤ Press three times followed by a long chirp. Zone 4 is now bypassed. ➤ Press a fourth time within five seconds: The siren chirps four times followed by a long chirp. Zones 2 and 4 are now bypassed. ➤ Press a fifth time within five seconds: The siren chirps five times followed by a long chirp. All input zones, except the ignition, are now bypassed. ➤ Continued pressing of will begin the Multi-Level Security Arming cycle over again. note: Multi-Level Security Arming only applies to a single arming cycle. Once the system is disarmed and then re-armed, all the zones will be active again. ➜ arming while driving Your system can be armed while driving the vehicle. Simply press on your transmitter for two seconds while the vehicle is running or while the ignition is on. The siren will chirp once and then once more to indicate that the ignition is on. The security system will not respond to any input except the door triggers and the Failsafe® Starter Kill (if installed) will not be activated. The security system will disarm automatically whenever the ignition is turned off. The siren will chirp twice and the LED will stop flashing. 10 © 2005 directed electronics, inc.all rights reserved