Viper 1002 Owner Manual - Page 37
programming options
View all Viper 1002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
twice. If the system has entered the triggered sequence (siren has begun chirping), pressing the disarm button of the Remote Control will not disarm VRS®. To disarm the VRS® during a VRS® trigger sequence: 1. Turn the ignition on. 2. Press the Valet button the pre- programmed number of times to DRW-35 disarm the VRS® system. note: If the VRS® system has begun its chirping sequence, the ignition must be turned off, then on to disarm. If you are driving the vehicle at the time, pull to a safe place away from traffic and follow the triggered sequence disarm procedure. programming options See your dealer for further details on the options listed below available with this system. Automatic Engine Disable: Prevents the vehicle from being started even if the vehicle is not armed after turning the ignition Off and exiting the vehicle. Comfort Closure: Windows will close upon locking the vehicle. Dual Sensor Trigger: If programmed both the onboard and at least one of the optional sensors need to be triggered within 1- 32 © 2006 directed electronics