Viper 1002 Owner Manual - Page 15
multi-level security arming - remote start
View all Viper 1002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
When armed, your vehicle is protected as follows: ➤ Light impacts will trigger the Warn Away® signal. When triggered, the siren will chirp and the parking lights will flash for a few seconds. ➤ Heavy impacts will trigger the system. The triggered sequence is between 1-180 seconds of constant siren and flashing parking lights. ➤ If a door is opened, the system will immediately start chirping the siren and flashing the parking lights. Three seconds later, the siren output changes to a continuous blast. This progressive response gives you time to disarm the system with your remote control if you inadvertently open the door while the system is armed, while still providing an instant response (even if the door is immediately closed). ➤ Turning on the ignition key will trip the same two-stage response as opening a door. ➤ The optional starter kill prevents the vehicle's starter from cranking. ➜ multi-level security arming Multi-Level Security Arming allows you to select which of the security system's inputs or sensors will be active and which will be bypassed at the time that the system is armed. (See the Table of Zones section of this guide.) Pressing again within five seconds of arming the security system will activate the Multi- Level Security Arming feature. Each time is pressed again, a different security level is selected. The different security levels can be selected as follows: 10 © 2006 directed electronics