URC THZ-100 Owners Manual - Page 13
Changing the Mode Cool, Heat, Auto, Off, Changing the Heating Temperature Temperature Override
View all URC THZ-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
THZ-100 THERMOSTAT At the bottom of the screen is a smart-key label to identify the current function of the push button located directly below. Changing the Mode (Cool, Heat, Auto, Off) To change the mode of your HVAC system equipment between Cooling, Heating, Auto (system will automatically change between cooling and heating) or OFF enter the Options menu then access the Climate Modes sub menu as described below. Changing the Heating Temperature (Temperature Override) To change the current heating temperature, press the Up or Down arrow key on the thermostat. The thermostat screen shows the current temperature on the left side and the desired temperature on the right side of the display. Press the Up and Down arrow keys to set your new desired heating temperature to override the programmed value. To save the new desired value, press the key below the Set Tempkey label in the smart-key labeled Set Temp at the bottom right of the display. You can also save the new desired temperature by simply allowing the display to time out while the current and desired override temperatures are displayed. If you decide to cancel the operation, press the key below the Cancel key label in the smart-key label at the bottom left of the display. This places the thermostat in the Override mode. While in this mode, the thermostat holds your new temperature selection until the next regularly scheduled time period in your pre-programmed HVAC schedule. Page 9