URC MX-600 Owners Manual - Page 48
Glossary
View all URC MX-600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
18. Glossary Discrete codes: Versions of toggle codes that only perform one function. Some examples would be "POWER ON" and "POWER OFF" or "VCR," "TUNER" and "DVD" receiver inputs. These types of signals are most often used to ensure your home theater components stay completely in sync for powering on and off and changing device inputs. Some of the preprogrammed codes in the MX-600 contain discrete codes. If your original remote contains discrete codes, these can be taught to the MX-600 as well. Device: The MX-600 remote control is capable of controlling a certain number of devices, or pieces of equipment. Examples of devices would be televisions, DVD players, receivers or VCRs. Some devices, such as receivers or dual-cassette decks, may be treated by some remotes as more than one device. Also known as components. Firmware: Indicates the programming software stored on the remote control. The MX-600 remote can have its firmware flashed (upgraded) to a newer version. Frequencies: The range of infrared carrier frequencies that a remote control is capable of learning or controlling. Most remotes operate between 30 and 60kHz, however some use higher and are thus known as high frequency. The MX-600 operates and can learn frequencies between 10 kHz and 100kHz. Hard buttons: Refers to all physical (mechanical) buttons on a remote control. High frequency: Indicates an infrared system that employs 47