URC MX-600 Owners Manual - Page 23

Important: Press the button.

Get URC MX-600 PDF manuals and user guides View all URC MX-600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

5. Programming the MX-600 to Control Your Components 2. Programming The Ten Device Buttons This will program ONE learned code onto the Device button, so that when you select that Device, it will send out the learned signal as it changes to that Device's function pages. 1. Go to the SETUP mode by pressing both the MAIN and ENT buttons simultaneously for three seconds. 2. Press the LEARN button next to the LCD screen. 3. Important: Press the PAGE button. 4. Place your original remote control head to head with the MX-600 about 2 inches apart on a flat surface. 5. Select any of the ten device buttons you wish to program on the MX-600. Press the button on your original remote control you wish to program into the Device button you have chosen on the MX-600. Once the MX-600 has received the signal, the MX-600 will flash "Good" on the LCD screen, indicating it learned the code correctly. If it flashes "Fail", repeat from Step 4 until it learns successfully. (Please enter the code signal within 20 seconds of programming.) 6. Return to Step #5 until you have programmed all of the Device buttons that you require. 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
22
2. Programming The Ten Device Buttons
This will program ONE learned code onto the Device
button, so that when you select that Device, it will send out
the learned signal as it changes to that Device's function
pages.
1.
Go to the SETUP mode by pressing both the MAIN and
ENT buttons simultaneously for
three seconds
.
2.
Press the LEARN button next to the LCD screen.
3.
Important: Press the PAGE button.
4.
Place your original remote control head to head with the
MX-600 about 2 inches apart on a flat surface.
5.
Select any of the
ten device buttons
you wish to
program on the MX-600. Press the button on your original
remote control you wish to program into the Device button
you have chosen on the MX-600. Once the MX-600 has
received the signal, the MX-600 will flash “Good” on the
LCD screen, indicating it learned the code correctly. If it
flashes “Fail”, repeat from Step 4 until it learns
successfully. (Please enter the code signal within 20
seconds of programming.)
6.
Return to Step #5 until you have programmed all of the
Device buttons that you require.
5. Programming the MX-600to Control Your Components