URC MRX-8 Owners Manual - Page 10
Wiring to the Relay on the MRX-8, Relay, Using an RFTX-1 for URC One-Way Lighting products, RFTX-1
 |
View all URC MRX-8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
TOTAL CONTROL MRX-8 SYSTEM CONTROLLER Wiring to the Relay on the MRX-8 The MRX-8 has a Relay with three contacts, NO, NC, and COM. These can be used as dry contacts or to an electrical switch or motor for use with screens, blinds, curtains, etc. The Relay can be programmed as either a latching or a momentary contact. Using an RFTX-1 for URC One-Way Lighting products The MRX-8 can use an RFTX-1, via the available RFTX-1 port. It controls URC One-Way Lighting products at 418 or 433.92 MHz. Use the included 3.5mm to 3.5mm to connect to the RFTX-1 and plug the other end into the RFTX-1 port (#6). RFTX-1 Page 7
-
1 -
2
-
3
-
4
-
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16
-
17
-
18
-
19
 |
 |
Page 7
Wiring to the Relay on the MRX-8
The MRX-8 has a
Relay
with three contacts, NO, NC, and COM. These
can be used as dry contacts or to an electrical switch or motor for use
with screens, blinds, curtains, etc. The Relay can be programmed as
either a latching or a momentary contact.
Using an RFTX-1 for URC One-Way Lighting products
The MRX-8 can use an
RFTX-1
, via the available RFTX-1 port. It
controls URC One-Way Lighting products at 418 or 433.92 MHz.
Use the included 3.5mm to 3.5mm to connect to the RFTX-1 and
plug the other end into the RFTX-1 port (#6).
T
OTAL
C
ONTROL
MRX-8 S
YSTEM
C
ONTROLLER
RFTX-1