Toshiba X21U Owners Manual - Page 78
Document, imaging camera, camera subject which is too dark or vivid., When finished
View all Toshiba X21U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Picture projection with the document imaging camera (continued) CONTENTS 78 6 CAMERA GAIN Press CAMERA GAIN (+/-) to improve view of a camera subject which is too dark or vivid. Notes • You can adjust the "Sharpness" of the camera image on the menu screen. 54 • If the image flickers due to a fluorescent light in the room, either turn off the fluorescent light or set the "Shutter" from the menu screen. 54 FOCUS Note that the image may still flicker due to the lighting, the document status, the image adjustment, etc., even if the "Shutter" setting is changed. Document imaging camera ENTER MENU INPUT TEMP BUSY LAMP FAN ON/STANDBY ON EXIT KEYASUTOTONE VOL/ADJ. SAEUTTO LOCK W.BALANCE GAIN STORE CAMERA ARM LIGHT W.BALANCE STORE IMAGE ARM LIGHT LOCK CAMERA GAIN CAMERA Camera control panel 6 7 When finished, turn off the light and close it, and put back the arm. Follow the steps of "Preparation of the document imaging camera" in reverse. Notes • Though this projector uses a 1.45 million pixel camera unit, the images projected on the screen are 1024 x 768 dot images. If the "Screen size" in the menu screen 54 is set to "Full", the camera's full image is compressed to 1024 x 768 dots. If "Thru" is selected, the 1024 x 768 dots at the center of the image are projected. • The light turns off automatically when the arm is leaned. • When the arm is not raised up, the camera source cannot be projected. • In the camera input selected, audio signals are not output.