Stihl SR 420 Instruction Manual - Page 22
Allow engine to warm up
View all Stihl SR 420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
2 1 373BA014 KN English / USA : Fit the spark plug and reconnect the spark plug boot. : Move the stop switch to # : Turn the choke knob to e even if the engine is cold. : Now start the engine. Fuel tank run until dry and then refueled : Pull the starter rope several times to prime the fuel line. 373BA016 KN 373BA015 KN As soon as engine runs: : Move the setting lever (2) to the lower stop so that the engine settles down to idle speed. To shut down the engine: : Move the stop switch (1) to 0 or STOP. At very low outside temperatures: Allow engine to warm up As soon as engine runs: : Move the setting lever to the lower stop - the engine settles down to idle speed. : Open throttle slightly - warm up engine for a short period. If the engine does not start: If you did not turn the choke knob to e quickly enough after the engine began to fire, the combustion chamber is flooded. : Pull off the spark plug boot. : Unscrew and dry off the spark plug. : Move the stop switch to 0 or STOP. : Open the throttle wide. : Pull the starter rope several times to clear the combustion chamber. SR 340, SR 420 21