Stihl SR 420 Instruction Manual - Page 21
When engine begins to fire
View all Stihl SR 420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
English / USA : Pull the starter grip slowly with your right hand until you feel it engage and then give it a brisk strong pull. Do not pull the starter rope out all the way as it might otherwise break. : Do not let the starter grip snap back. : Guide it slowly back into the housing so that the starter rope can rewind properly. 373BA012 KN 373BA013 KN : Put the unit on the ground. Check that bystanders are well clear of the general work area and the nozzle. : Make sure you have a firm footing: Hold the unit with your left hand on the housing and put one foot against the base plate to prevent it slipping. When engine begins to fire: : If engine is cold: Turn choke knob to e and continue cranking until engine runs. : If engine is warm: Continue cranking until engine runs. 20 SR 340, SR 420