Stihl MS 361 C Instruction Manual - Page 51

Starter Grip with ElastoStart, All Versions, Tensioning the Rewind Spring, Fit the washer

Get Stihl MS 361 C PDF manuals and user guides View all Stihl MS 361 C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

English / USA Starter Grip with ElastoStart* : Use a screwdriver to pry the rope out of the starter grip. : Remove the remaining rope from the rotor and grip. All Versions 2 3 4 4 001BA096 KN : Thread the new rope through the top of the starter grip. 213BA019 KN 5 6 7 : Thread the rope through the top of the guide bush (5), pull it through the rotor (6) and secure it with a simple overhand knot. : Coat rope rotor bearing bore with resin-free oil. : Slip rotor over the starter post (7) - turn it back and forth to engage anchor loop of the rewind spring. 213BA020 KN : Fit the pawls (4) in the rope rotor. : Fit the washer (3) on the starter post. : Use a screwdriver or suitable pliers to install the spring clip (2) on the starter post and engage it on the pawls' pegs - the spring clip must point clockwise as shown in the illustration. Tensioning the Rewind Spring : Make a loop in the starter rope and use it to turn the rope rotor six full revolutions in the direction of the arrow. 213BA021 KN * see "Guide to Using this Manual" 50 MS 361 C

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
50
English / USA
MS 361 C
Starter Grip with ElastoStart*
:
Use a screwdriver to pry the rope
out of the starter grip.
:
Remove the remaining rope from
the rotor and grip.
:
Thread the new rope through the
top of the starter grip.
*
see “Guide to Using this Manual”
All Versions
:
Thread the rope through the top of
the guide bush (
5
), pull it through
the rotor (
6
) and secure it with a
simple overhand knot.
:
Coat rope rotor bearing bore with
resin-free oil.
:
Slip rotor over the starter post (
7
) –
turn it back and forth to engage
anchor loop of the rewind spring.
:
Fit the pawls (
4
) in the rope rotor.
:
Fit the washer (
3
) on the starter
post.
:
Use a screwdriver or suitable pliers
to install the spring clip (
2
) on the
starter post and engage it on the
pawls’ pegs – the spring clip must
point clockwise as shown in the
illustration.
Tensioning the Rewind Spring
:
Make a loop in the starter rope and
use it to turn the rope rotor six full
revolutions in the direction of the
arrow.
213BA019 KN
6
7
213BA020 KN
5
4
4
3
2
001BA096 KN
213BA021 KN