Stihl MS 280 C Instruction Manual - Page 64
Specifications, Engine, Fuel/Oil System, Cutting Attachment
![]() |
View all Stihl MS 280 C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Specifications English / USA EPA / CEPA: The Emission Compliance Period referred to on the Emissions Compliance Label indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements. Category: A = 300 hours, B = 125 hours, C = 50 hours CARB: The Emission Compliance Period used on the CARB-Air Index Label indicates the terms: Extended = 300 hours, Intermediate = 125 hours, Moderate = 50 hours Engine STIHL single cylinder two-stroke engine Displacement Bore Stroke Idle speed Weight without bar and chain 3.3 cu in (54,7 cm3) 1.81 in (46,0 mm) 1.30 in (32,9 mm) 2,800 rpm 12.1 lb (5,5 kg) Ignition System, Electronic magneto ignition Spark plug (suppressed), NGK BPMR 7 A, Bosch WSR 6 F Electrode gap 0.02 in (0,5 mm) Fuel/Oil System Diaphragm carburetor All position diaphragm carburetor with integral fuel pump Fuel tank capacity 1.1 US pt (0,520 l) Fuel mixture See "Fuel" Chain lubrication Fully automatic, speed-controlled reciprocating oil pump. Additional manual oil flow control Oil tank capacity 0.6 US pt (0,280 l) Cutting Attachment Recommended cutting attachments for compliance with § 5.11 of ANSI standard B 175.1-2000 (see page 16 of this manual): STIHL reduced kickback bar (with green label) for .325" pitch: Rollomatic with sprocket nose 40, 45 or 50 cm (16, 18 or 20") STIHL low kickback chain1) (with green label) for .325" pitch: Rapid-Micro 2 (23 RM2, 26 RM2) Rapid-Micro C3 (23 RMC3, 26 RMC3) spur sprocket : 7-tooth for 0.325" pitch MS 280 C 1) See definition of "low kickback chain" on page 19 of this manual 63
![](/manual_guide/products/stihl-ms-280-c-instruction-manual-8cb92a6/64.png)