Stihl FS 360 C-E Product Instruction Manual - Page 29
Balancing the, Trimmer/Brushcutter
View all Stihl FS 360 C-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
FS 360 C Balancing the Trimmer/Brushcutter The type and version of the harness and snap hook depend on the market. 1 FS 260 C English 002BA389 KN Connect machine to harness Circular saw blades should "hover" approx. 8 in. (20 cm) above the ground. 2 1 Carry out the following steps to attain the proper hanging position: 1 Letting the machine swing until it 2 2 stops moving 3 002BA387 KN 002BA411 KN 002BA390 KN N Put on the full harness (1). N Adjust the length of the strap so that the carabiner (2) is about a hand's width below your right hip. N Attach the spring hook to the machine's perforated strip (3). Find the right attachment point for the cutting attachment you are using - see "Balancing the Machine". N Hook the snap hook (1) into the carrying ring (2) on the drive tube Hanging positions Mowing heads, grass cutting blades and brush knives should rest lightly on the ground. 002BA388 KN 23 N Undo the screw (3) N Adjust carrying ring (2) - tighten screw lightly - let the machine swing until it stops moving - check hanging position Once the proper hanging position has been attained: N Tighten the screw on the carrying ring FS 260 C, FS 360 C 27