Stihl FC 75 Instruction Manual - Page 28
Replacing the Starter Rope and Rewind Spring, Removing the Starter Cover, Removing the Rope Rotor
![]() |
View all Stihl FC 75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Replacing the Starter Rope and Rewind Spring 14 English / USA 6 392BA013 KN 392BA014 KN 392BA015 KN 5 2 7 1 1 3 Removing the Starter Cover : Take out the screws (1). : Lift the starter cover (2) away from the tank (3) and pull it out from under the shroud (4). Removing the Rope Rotor : Take out the screw (5). : Remove the rope rotor very carefully. The rewind spring is seated in the rope rotor and may pop out and uncoil if care is not taken. The pieces of broken spring may be under tension and fly apart unexpectedly when you remove the rope rotor. To help reduce the risk of injury, wear face protection and gloves. Replacing the Starter Rope : Use a screwdriver to pry the cap (6) out of the starter grip. : Remove remaining rope from the rotor and grip, making sure the ElastoStart sleeve is not pushed out of the grip. : Tie a simple overhand knot in the end of the new starter rope (see Specifications) and then thread the rope through the top of the grip and the rope bushing (7). : Refit the cap in the grip. FC 75 27
![](/manual_guide/products/stihl-fc-75-instruction-manual-fe1abc4/28.png)