Stihl BR 800 C-E MAGNUM Instruction Manual - Page 27
Engine Management, Adjusting the Carburetor, Spark Plug
View all Stihl BR 800 C-E MAGNUM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Engine Management Adjusting the Carburetor Exhaust emissions are controlled by the design of the engine and components (e.g. carburation, ignition, timing and valve or port timing). Adjusting Idle Speed Engine stops while idling: N Turn the idle speed screw (LA) slowly clockwise until the engine runs smoothly. 0000-GXX-6224-A0 0000-GXX-5396-A0 English Spark Plug If there is a loss of engine power, the machine is difficult to start or runs poorly at idle, first check the spark plug. Install a new spark plug after approximately 100 operating hours or earlier if the electrodes are eroded/corroded. The wrong fuel mix (too much engine oil in the gasoline), a dirty air filter and unfavorable running conditions (mostly at part throttle etc.) affect the condition of the spark plug. These factors cause deposits to form on the insulator nose, which may degrade performance. Removing the Spark Plug 3 1 4 2 N Loosen the screw (1). N Remove the cover (2). N Pull off the spark plug boot (3). N Unscrew the spark plug (4). BR 800, BR 800 X 25