Stihl BR 800 C-E MAGNUM Instruction Manual - Page 17
Adjusting the Throttle Cable, Fitting the Harness
View all Stihl BR 800 C-E MAGNUM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Adjusting the Throttle Cable Fitting the Harness It may be necessary to correct the adjustment of the throttle cable after Adjusting the Harness assembling the machine or after a C prolonged period of operation. Adjust the throttle cable only when the unit is completely and properly assembled. A D English 002BA655 KN 271BA047 KN 271BA048 KN N Set the throttle trigger to the full throttle position. N Carefully rotate the screw in the throttle trigger in the direction of the arrow until you feel initial resistance. Then rotate it another half turn in the same direction. B A Pull the ends of the straps to tighten the harness. B Lift the tabs of the adjusters to loosen the straps. C Close the buckle by pushing the two parts together. D Squeeze the hooks to open the buckle. BR 800, BR 800 X 15