Sony SDM-HX73 Operating Instructions - Page 21

Troubleshooting Before contacting technical support, refer to this section. On-screen messages If there is something wrong with the input signal, one of the following messages appears on the screen. To solve the problem, see "Trouble symptoms and remedies" on page 22. If "OUT OF RANGE" appears on the screen This indicates that the input signal is not supported by the monitor's specifications. Check the following items. For more information about on-screen messages, see "Trouble symptoms and remedies" on page 22. If "xxx.x kHz / xxx Hz" is displayed This indicates that either the horizontal or vertical frequency is not supported by the monitor's specifications. The figures indicate the horizontal and vertical frequencies of the current input signal. I NFORMA T I ON OUT OF RANGE I NPUT # : XXXXX XXX . XKHz / XXXH z If "RESOLUTION i 1280 × 1024" is displayed This indicates that the resolution is not supported by the monitor's specifications (1280 × 1024 or less). I NFORMA T I ON OUT OF RANGE I NPUT # : XXXXX RESOL UT I ON > 1. 2 8 0 X 1 0 2 4 If "CABLE DISCONNECTED" appears on the screen This indicates that the video signal cable has been disconnected from the currently selected connector. When INPUT SENSING ON/OFF (page 17) is set to ON, the monitor finds another input signal and changes the input automatically. I NFORMA T I ON CAB L E D I SCONNECT ED I NPUT # : XXXXX GB If "NO INPUT SIGNAL" appears on the screen This indicates that no signal is being input via the currently selected connector. When INPUT SENSING ON/OFF (page 17) is set to ON, the monitor finds another input signal and changes the input automatically. I NFORMA T I ON NO I NPUT S I GNA L I NPUT # : XXXX X (continued) 21