Sharp XVZ200 Operation Manual - Page 53
Selecting the Signal, Setting the Video Signal, VIDEO menu only
View all Sharp XVZ200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Using the "Options" Menu Selecting the Signal Type This function allows you to select the input signal type Component or RGB for INPUT 2. Select "Signal Type" in the "Options" menu on the menu screen. ➝For operating the menu screen, see pages 38 to 41. Selected Item Description RGB Component Set when RGB signals are received. Set when Component signals are received. Note • "RGB" or "Component" can be selected with on the remote control only in INPUT 2. Setting the Video Signal (VIDEO menu only) The video input system mode is preset to "Auto"; however, it can be changed to a specific system mode if the selected system mode is not compatible with the connected audiovisual equipment. Select "Video System" in the "Options" menu on the menu screen. ➝For operating the menu screen, see pages 38 to 41. Note • When the system mode is set to "Auto", you may not receive a clear picture due to signal differences. Should this occur, switch to the video system of the source signal. • "Auto" cannot be set for PAL-M and PALN input signals. Select "PAL-M" or "PALN" in "Video System" menu for PAL-M and PAL-N input signals. -52 XV_Z200U_E_p51_56.p65 52 On-screen Display RGB/COMP. button On-screen Display 03.10.28, 1:55 PM