Sharp XVZ200 Operation Manual - Page 29
Rear Projection, Projection using a mirror, Ceiling-mount setup
View all Sharp XVZ200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Setup Image Projection Rear Projection I Place a translucent screen between the projector and the audience. I Use the projector's menu screen to reverse the projected image. (See page 56 for use of this function.) When using the default setting. MOn-screen Display Note • Optimal image quality can be achieved when the projector is positioned perpendicular to the screen with all feet flat and leveled. Projection using a mirror I Place a mirror (normal flat type) in front of the lens. The image is reversed. Info • When using a mirror, be sure to carefully position both the projector and the mirror so the light does not shine into the eyes of the audience. Ceiling-mount setup I It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. I Before mounting the projector, remove the Swivel Stand. (See pages 24 and 25 for removing and attaching the Swivel Stand.) I Before mounting the projector, contact your nearest Authorized SharpVision Service Center or Dealer to obtain the recommended ceiling-mount bracket (sold separately). (AN-CM260 ceiling-mount bracket, AN- EP101B extension tube for AN-CM260.) I When the projector is in the inverted position, use the upper edge of the screen as the base line. I Use the projector's menu screen to select the appropriate pro- jection mode. (See page 56 for use of this function.) When using the default setting. MOn-screen Display The image is inverted. -28 XV_Z200U_E_p13_28.p65 28 03.10.21, 4:09 PM