Sharp XV-Z10000U XV-Z10000 Operation Manual - Page 56
Checking the Input Signal, Auto Sync Adjustment
UPC - 074000358836
View all Sharp XV-Z10000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Adjusting Computer Images Basic Operation Checking the Input Signal This function allows you to check the current input signal information. Select "Signal Info" in the "Fine Sync" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note • The projector will display the number of scanned lines available from audio-visual equipment such as a DVD player or Digital Video. Auto Sync Adjustment Used to automatically adjust a computer image. Select "Auto Sync" in the "Fine Sync" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note When setting to " Normal" or " High Speed": • Auto Sync adjustment will occur when the projector is turned on or when the inputs are switched, when connected to a computer. Manual adjustments should be performed: • When the optimum image cannot be achieved with Auto Sync adjustment. See page 53. • Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. • When setting "Auto Sync" to "OFF" or "High Speed", and if is pressed Auto Sync will be executed in "High Speed" mode. If the button is pressed again within one minute, Auto Sync will be executed in "Normal" mode. Screen display during Auto Sync AUTO SYNC button -55