Sharp XG-V10WU XG-V10WU Operation Manual - Page 47
Adjusting the Computer Images (RGB menu only
![]() |
View all Sharp XG-V10WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Adjusting the Computer Images (RGB menu only) Projector Remote Control 1, 5 2, 3, 4 1.2.3 4.5.6 When displaying computer patterns which are very detailed (tiling, vertical stripes, etc.), interference may occur between the LCD pixels, causing flickering, vertical stripes, or contrast irregularities in portions of the screen. Should this occur, adjust "Clock", "Phase", "H-Pos" and "V-Pos" for the optimum computer image. Description of Adjustment Items Selected item Clock Phase H-Pos V-Pos Description Adjusts vertical noise. Adjusts horizontal noise (similar to tracking on your VCR). Centers the on-screen image by moving it to the left or right. Centers the on-screen image by moving it up or down. (GUI) On-screen Display 2 3 • Computer image adjustments can be made easily by pressing AUTO SYNC ( ). See page 49 for details. (Select the desired computer input mode with INPUT 1 or 2.) (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position.) 1 Press MENU. 2 Press ß/© to select "Fine Sync". 3 Press ∂/ƒ to select a specific adjustment item. 4 Press ß/© to move the mark of the selected adjustment item to the desired setting. 5 To exit from the GUI, press MENU. • To reset all adjustment items, select "Reset" on the "Fine Sync" menu screen and press ENTER. Basic Operation E-46
![](/manual_guide/products/sharp-xgv10wu-xgv10wu-operation-manual-fbdce4e/47.png)