Sharp XG-NV7XUL XG-NV7XU Operation Manual - Page 21

Setting up the Screen Reversed Image Setup Rear projection • Place a translucent screen between the projector and the audience. • Use the projector's menu system to reverse the projected image. (See page 43 for use of this function.) Projection using a mirror • Place a mirror (normal flat type) in front of the lens. • Use the projector's menu system to reverse the projected image. (See page 43 for use of this function.) • The image reflected from the mirror is projected onto the screen. • Optimal image quality is produced with the projector positioned perpendicular to the screen with all feet flat and level. CAUTION • When using a mirror, be sure to carefully position both the projector and the mirror so the light does not shine into the eyes of the audience. Ceiling-mount Setup • It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. • Before mounting the projector, contact your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center to obtain the recommended ceilingmount bracket (sold separately). (AN-NV7T ceilingmount bracket, AN-TK201/202 extension tube for ANNV7T.) • When the projector is in the inverted position, use the upper edge of the screen as the base line. • Use the projector's menu system to select the appropriate projection mode. (See page 43 for use of this function.) Operation E-20