Sharp XG-NV7XUL XG-NV7XU Operation Manual - Page 13
Connecting other compatible computers, Connecting the Projector, Plug and Play, function
View all Sharp XG-NV7XUL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Setup & Connections Connecting the Projector Connecting other compatible computers When connecting the projector to a compatible computer other than an IBM-PC (VGA/SVGA/XGA/SXGA/UXGA) or Macintosh (i.e. Workstation), a separate cable may be needed. Please contact your dealer for more information. When connecting this projector to a computer, select "Computer/RGB" for "Signal Type" on the GUI menu. (See page 40.) • Connecting computers other than the recommended types may result in damage to the projector, the computer, or both. • AUDIO INPUT accepts INPUT 1 or 2 port input. "Plug and Play" function • This projector is compatible with VESA-standard DDC 1/DDC 2B when connecting to a 15-pin analog terminal and VESA-standard DDC 2B when connecting to a 20-pin digital terminal. The projector and a VESA DDC compatible computer will communicate their setting requirements, allowing for quick and easy setup. • Before using the "Plug and Play" function, be sure to turn on the projector first and the connected computer last. • The DDC, Plug and Play function of this projector operates only when used in conjunction with a VESA DDC compatible computer. To a computer using the direct digital input (PanelLink™) Computer audio cable QCNW-4870CEZZ 1 Connect one end of the digital cable to the INPUT 2 port on the projector. 2 Connect the other end to the corresponding termi- nal on a computer. 3 To use the built-in audio system, connect one and of the supplied computer audio cable to AUDIO INPUT terminal on the projector. Connect the other end to the Audio output terminal on the computer. Digital cable (sold separately) 2 To digital output terminal Computer audio cable (3.5 mm stereo minijack cable) To audio output terminal Computer E-12